In addition to the Five fingers rule for heat exchangers, there is also a Four fingers rule that refers to the four parameters required for the proper design and sizing of thermal machines such as dry coolers, chillers or evaporative towers.
Micro channel brazed plate heat exchangers employed in chillers allow to reduce the amount of refrigerants flowing within the exchanger, contributing to the reduction of emissions and greenhouse gases in industrial refrigeration.
The wind chill effect explains very well the way evaporative towers work, or adiabatic coolers, referring to that chilling sensation that we experience when coming out of the sea after a swim in a windy day.
NEW Tempco 3-in-1 brazed plate heat exchanger for large air dryer applications combining evaporator, condenser and a pre-cooler/heater together in one and reducing size by 50%.
Anti freeze resistances, exhaust steam piping or stopping the fans, a bunch of tricks to avoid water from freezing inside cooling towers during the cold season in extreme climate areas.
Often associated with news about pollution, emissions and environment, the huge plume coming out of the top of cooling towers is nothing but water vapor.
Drift separators in cooling towers are components aimed to contain water consumption in evaporative towers, the thermoformed type is the most employed, usually made in plastic materials.
Significant cost savings thanks to reduced energy consumption and no maintenance costs with EC motors in retrofit on refrigerated counters, evaporators and chillers in supermarkets.
Functioning and characteristics of cooling towers in cooling water for industrial processes, taking advantage of water evaporation and latent heat of vaporization with a contained energy consumption.
How does it work a chiller, simply employing a thermal transfer cycle through compression, evaporation and a condenser with a refrigerant gas as thermal vector and using heat exchangers.
